24 Chrome 6-Spline Drive Acorn Cone Seat 1.37" Length End Closed Lug Nuts 12 x 1.5 with 2 Pcs of 3/4"&13/16" Lug Nut Socket Keys
Newly Produced at 07/2020 and just come back in stock!
Quantity | Set of 24 Lug Nuts + 2 Socket Keys |
Thread Size | 12x1.5 Hex 3/4" (19mm) |
Type | Long Spline, Closed End |
Seat Type | Cone Seat 60 degree tapered |
Nut Height | 1.37 inches (35mm) |
Socket Key Hex | 19mm (3/4") & 21mm (13/16") |
Material | Cold Forged Steel (Heat Treated) |
Color | Chrome |
- Brand New Set of 24 Pc 12x1.5 Chrome Toyota/Lexus Tuner 6 Spline Lug Nuts + 2 Socket Keys
- These lug nuts are manufactured with the
highest quality to exceed OEM standards
- One of the best aftermarket lug nuts out in
the market
- Paint will not fall off easily. Guaranteed!
- Great for enhancing your wheels overall
look of your vehicle
- Designed for Toyota & Lexus vehicles
using aftermarket wheels
- Thin Spline Drive Design is ideal for wheels with small diameter lug holes
- IMPORTANT SAFETY WARNING: Before purchasing, Check your current lug nut size (length/width/seat). These are NOT OEM SIZE, and may not fit OEM wheels or wheels made by the manufacturer that need a wider lug seat. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion.
-
- Please verify you are purchasing the
correct lug nuts:
- Thread type? -12x1.5 | Seat type? -Conical | Lug nut
type? -6 Spline
- Thread type? -12x1.5 | Seat type? -Conical | Lug nut
type? -6 Spline
- Make sure you get 5-7 turns before tightening
- Must be torqued down by hand at 110 FT/LBS.
- Please verify you are purchasing the
correct lug nuts:
Compatible with vehicles with Metric 12x1.5 Wheel Studs. Confirm Vehicle is on List Below:
YEAR RANGE |
MAKE |
MODEL |
1997-2016 |
Toyota |
4 Runner, Celica, RAV4, Avalon |
2001-2016 |
Toyota |
Cammy, Lexus, Avalon, Sienna |
1999-2016 |
Toyota |
Tacoma, Tundra, Solara, Corolla |
2000-2016 |
Toyota |
Highlander, Land Cruiser, FJ Cruiser |
Before Purchasing Please Carefully Verify Bellowing:
Verify Thread Size - If your vehicle is not shown as compatible above, it is the buyer's responsibility to ensure they are purchasing the correct thread size.
Verify Seat Type - Wheel Lug Holes have a variety of seat types. It's impossible for us to know what you have. Therefore, it is the buyer's responsibility to verify the seat of this nut matches their wheels.
Verify Lug Nut Measurements - We cannot know what wheel you own. It is necessary for you to check the diagram of the nut (width/length/etc) to ensure it will work with your wheels.
Verify Wheel Lug Hole Diameter - The
socket key that comes with these lug nuts are 22mm (0.9") in diameter. Your
wheel lug hole diameter must be larger than that.
Installation Notice:
Professional Installation Recommended.
Be sure to torque the lug nuts to the vehicle manufacturer specifications.
Avoid using an impact wrench; improper usage may cause damage to components.
Check and re-torque after 25-50 miles of driving.
General Policies
If you have a question about a part you should contact us before buying. Christ One Auto parts is proud to offer you the best price and fastest service for all your aftermarket parts needs. In order to keep our prices low, we have the following purchasing policies:
- Shipping and Billing:
-
- We ship 99.9% of packages the same day if ordered before 4PM EST.
- Returns:
-
- We only warranty cost of parts. Any installation or other fees are non-refundable.
- If the buyer needs to cancel the item, the buyer must notice us before the transaction be Shipped out.
-
International Shipping Attention:
TRACKING NUMBER is available for standard shipping. The delivery takes 2-4 weeks.
UPDATE YOUR SHIPPING ADDRESS before purchase. We do not accept address change requests after purchasing. If you forgot to update your shipping address, please ask for the cancellation before it ships and then re-buy it again.
CANCELLATION is only accepted before order ships.
CUSTOMS, IMPORTED DUTIES, AND TAXES, if applies, must be borne by the recipient.
PLEASE READ THROUGH THIS PAGE so that we can avoid any misunderstandings. Please ask questions before purchase.
Customs, Duties and Taxes:
When you order from us out of USA, you or a recipient of the order is the importer of record and responsible for assuring the product can be lawfully imported to the destination country. The order maybe subject to import taxes, customs duties and fees levied by the destination country. The recipient of an international shipment may be subject to such import taxes, customs duties and fees, which are levied once a shipment reaches the recipient's country. Additional charges for customs clearance must be borne by the recipient ( International Carrier FedEx or USPS May contact you for those payment); we have no control over these charges and can't predict what they may be. Customs policies vary widely from country to country; you may contact your local customs office for more information. When customs clearance procedures are required, it can cause delays beyond our original delivery estimates.
Manufacturer Information:
CHRIST ONE INDUSTRIES GROUP offers an extensive coverage of Wheel Accessories for a large range of automotive and heavy-duty wheel end applications. Our Products are manufactured in ISO 9000 / 9001 / 9002 certified facilities. CHRIST-ONE-AUTOPARTS products delivers the look, feel, fit and performance of OE. Manufactured with Internal Wheel accessories that are specifically designed to combat all types of road conditions to keep debris out and keep the Wheel turning. With am OE design, simple and easily installation and long life as a guarantee.
Return Policy:
Customer must contact Christ-one-autoparts within 30 days of receiving shipment for approval of any return or exchange.
Returns or exchanges will be subject to a 15% restocking fee of the original item purchased plus cost of return shipping and replacement shipping.
Exchanges due to shipping errors by us will not be subject to a
restocking fee or shipping charges.
- SUV / Truck / High Performance /Passenger Car
- CHRISTONE
- Continuous Operation
- Wheel Lug Nut
- Chrome Coated
- Coated Heat Treated Steel
- 10 Years
No posts found